Ram And Clevis Kit Trail Gear$764.88 – $801.31 option Choose an option6 Inch8 Inch10 Inch Double EnddedClear Ram And Clevis Kit Trail Gear quantity Add to cart SKU: 130281-1-KIT-FLCL Categories: Double Ended Rams, Power Steering Cylinder Clevis Ends Description Additional information Reviews (0) Description 6 Inch Ram and Clevis Kit. Rock Assault Double Ended Ram and Clevis Kits. Through years of research, development, and testing we at Trail-Gear have developed our double ended ram to meet the tough demands of top level rock crawling competitors and the toughest trails in the world. Based on our experience we knew exactly what we wanted in a ram, and what we didn’t. Most rams on the market only have one rod seal. We started with the primary and secondary rod seal to insure that fluid leakage would never be an issue. We also included two wiper seals in our design to make sure that dirt and debris stay on the trail and don’t get into your steering system. In addition, we designed our ram with a Triple Lip Piston Seal for consistent steering with no drift or fluid bypassing the piston. In true Trail-Gear style we also had to make our ram the strongest on the market, so we added a feature that you will not see on any other ram on the market. We designed ours with a piston wear band and a rod bushing. The bushing allows the rod to absorb much higher side loads. We also machined our piston shaft out of a single piece of 4340 chromoly. Other rams on the market use a two-piece welded or threaded piston shaft that can fail under severe loads. Our Double Ended Ram and Clevis Kits have a 6 Inch, 8 Inch, or 10 Inch stroke x 2.25 Inch bore x 1.125 rod. The cylinder has a black zinc-plate finish while the rod has 0.75 x 16 female threads on each end and is made entirely out of 4340 chromoly material. The 6 Inch ram and clevis kit has 6 total Inches of travel and is perfect for Toyota’s and narrowed Dana 44’s. The 8 Inch ram and clevis kit has 8 total Inches of travel and was made to work with Dana 44’s and custom length Dana 60 applications.The 10 Inch ram and clevis kit has 10 total Inches of travel and is used for buggies and comp rigs with up to 45 degree steering radius. Kits includes: 1X 6 Inch, 8 Inch, or 10 Inch Double Ended Ram 4X Cylinder Clamps 2X Clevis Ends 2X Clevis End Bolts 2X Grade 8 Bolts 4X Spacers Specs: Sold As: Kit Color: Black Material: Chromoly Finish: Zinc-Plated Warranty: 12 Month Limited Warranty Location: Front Size: 6.0 Inch Country of Origin: USA Additional information Weight 24.00000 lbs Dimensions 37.00000 × 8.00000 × 8.00000 in option 6 Inch, 8 Inch, 10 Inch Double Endded Reviews There are no reviews yet. Be the first to review “Ram And Clevis Kit Trail Gear” Cancel replyYour email address will not be published. Required fields are marked *Your rating * Rate… Perfect Good Average Not that bad Very poor Your review *Name * Email * Related products Double Ended Rams/SteeringMale JIC to Male SAE Fitting $8.93 Select options Double Ended Rams/Power Steering Cylinder Clevis EndsHD Ram And Clevis Kit Trail Gear $854.80 Select options Components/Differential Pinion Flange/Double Ended RamsDouble Ended Ram Mounting Kit Trail Gear $242.89 Add to cart